 |
| | Plastic Pipeline Systems - Products |
Tyco Water Plastic Pipelines Systems manufacture and distribute a large range of products, information relating to the piping systems available are detailed below. | | | For further information please do not hesitate to contact our National Customer Service Centre on:
Ph: 1800 811 848
: 61 3 9217 3188
Fax: 61 3 9305 4380
email: twpps@tycowater.com
To view the various documents, you require Adobe Acrobat Reader installed.
Please download the latest reader via the link provided.
|
|
ABS – DURAFLO & FREEFLO Pipe Systems
Renowned as one of the toughest and high security piping systems available on the market today, ABS is used for many arduous and diverse applications. These cover Mechanical Services, Mining & Mineral Processing, Industrial & Power Generation, Water & Wastewater Infrastructure and Industrial Plumbing to name but a few.
TWPPS (Eurapipe) manufacture two systems dependant on the application, our Duraflo piping system is the choice for most applications using a true cold solvent weld jointing method for both above and below ground installations. Our Freeflo product has been developed for the water industry where a rubber ring joint and pipe size compatibility is required, Freeflo will connect to traditionally used materials such as Hobas & DICL etc
Temperature Range: -30°C to 60°C.
Jointing Method: Solvent Weld or Rubber Ring Joint.
Size Range:
· DN15 – DN750mm (Duraflo – SWJ).
· DN300 - DN750mm (Freeflo - RRJ)
· DN300 - DN600mm (Freeflo - RRJ - Metric)
Note: Freeflo is a non-stockable product; it is produced to order and subject to minimum order quantities. Minimum order quantities vary based on the size and class required. Please contact our Customer Service Team on 1800 811848 for further information regarding our Freeflo product range.
EURAPIPE ABS PRESSURE PIPE SYSTEMS
TABLE OF CONTENTS
1. INTRODUCTION
2. ABS PIPE SYSTEMS
3. ABS MATERIAL
4. DURAFLO DESIGN
5. ABS INSTALLATION
6. DURAFLO PIPE AND FITTINGS
7. FLOW NOMOGRAMS
 HVAC BROCHURE
| 
|
ABS – K-FLO Pre-insulated Piping Systems
K-FLO is a totally integrated pre-insulated piping system for use in the Mechanical & Building Services industry. The K-FLO system is unique in its manufacture by providing a piping package that only requires a simple vapour barrier at the joint closure, the system does not require any field fabrication or on site lagging, this substantially reduces the installation time and provides significant cost savings.
TWPPS (Eurapipe) K-FLO product is an ideal totally integrated pre-insulated pipe system for chilled water applications.
Temperature Range: -30 degC to 70 degC
Jointing Method: Cold Solvent Cement Welding
Size Range (Core): DN25mm - DN750mm
Note: K-FLO can also be manufactured using a broad range of metallic core types (Steel, Stainless Steel, Copper, etc) where required.  EURAPIPE PREINSULATED PRESSURE PIPE SYSTEMS
TABLE OF CONTENTS
|  |
ABS – STRATAFLO Bore Casing
TWPPS (Eurapipe) Strataflo bore-casing is a proven performer in one of the worlds harshest environments, while retaining its reliability and cost effectiveness. Although many thermoplastics have been used, no other system incorporates the correct combination of mechanical strength, high impact strength, corrosion resistance and lightweight all-round toughness as the Eurapipe Strataflo system.
Strataflo utilises all the desirable properties in conjunction with a proven flush-joint system. This allows a minimum diameter bore to be drilled and therefore eliminates unnecessary oversize drilling and development costs. Slotted screens and a full range of accessories are available to compliment the Strataflo system.
Temperature Range: -30 degC to 70 degC
Jointing Method: Flush Joint Threaded, Flush Joint Solvent Weld and Spigot/Socket.
Size Range: DN80 - DN600mm. |  |
ABS – ABScon Electrical Conduit
ABScon has been specifically designed to meet the arduous conditions that are often experienced in mining and industrial applications. ABScon has been the preferred material selected over traditional conduit by many mining companies owing to its high impact strength, resistance to corrosion and superior weathering capabilities. ABScon is halogen free, this coupled with the other combined characteristics of ABS gives the confidence you have chosen a secure long life conduit system to suit the harshest of environments.
Temperature Range: -30 degC to 70 degC
Jointing Method: Push Fit or a Water Tight Solvent Weld Joint.
Size Range: 20 - 150mm
 ABScon -High Impact ABS Conduit Brochure
| 
|
CHEMFLO
Plastic Lined Steel Piping Systems
Plastic lined steel piping systems are used world wide for the conveyance of abrasive, corrosive, environmentally sensitive effluents and high temperature media, CHEMFLO provides the structural strength of a steel outer with the chemical and corrosion resistance of plastics. In using a CHEMFLO piping system the support centres are the same as a steel pipe and there is no requirement for pressure/temperature de-rating of the liner material.
Various lining materials can be used depending on the application, these include Polyethylene, Polypropylene, PVDF and PTFE, this allows for extreme temperatures of up to 230°C. Outer surface treatment of the steel pipe can be selected to cover all types of external environmental attack.
Temperature Range: Up to 230 degC (Liner dependant)
Jointing Method: Flanged lengths of up to 12m.
Size Range: DN25 - DN400mm.
Chemflo Brochure 105 KB | 
|
CHEMFLO PLUS - “Email 800”
Enamel (Glass) Lined Steel Piping Systems
“Email 800” is specifically manufactured for use in the chemical and pharmaceutical industry where high temperatures combined with very aggressive chemicals restricts the use of traditional materials.. Special surface protection together with “Email 800” is ideal for handling aggressive media. The system is highly resistant to chemical attack and corrosion and has temperature capabilities of up to 230°C.
The pipe system covers nominal diameter from 25mm to 600mm in 3 or 4 metre lengths depending upon the nominal diameter and can be supplied in either DIN or ANSI. The external finish is a primer coating on a zinc dust base, however a lacquer galvanised finish can be applied to order.
Temperature Range: Up to 230 degC
Jointing Method: Flanged fittings and pipe in 3m or 4m lengths
Size Range: DN25 - DN600mm |  |
CORZAN PVC-C
Schedule 40 & 80 Piping Systems.
PVC-C is a post-chlorinated PVC and has been specifically developed for the industrial market CORZAN has excellent chemical resistance, heat retention and rigidity at elevated temperatures. CORZAN PVC-C is able to convey hot corrosive liquids at temperatures up to 100°C.
Areas of application include Pulp & Paper, Metal Treatment / Electroplating Plants, Photographic Industry & Hot Water (bottle washes etc). Installation of CORZAN PVC-C is made simple by using a cold solvent cement joint method which is similar to our ABS piping system.
Temperature Range: 0 degC to 100 deg C
Jointing Method: Cold Solvent Cement
Size Range: DN15 - DN400mm |  |
CORZAN PVC-U (Grey)
Industrial Schedule 40 & 80 Piping Systems.
PVC is one of the most widely used piping systems on the market, it has become the most general specified thermoplastic material for many years. It is highly suitable for interior and buried applications, should PVC – U be installed where it is subject to prolonged exposure to sunlight it is recommended the system be painted. PVC – U resists attack from most solutions of acids, alkalies and salts; however PVC – U is not resistant to aromatic and chlorinated hydrocarbons. PVC – U offers the user an economical, lightweight pipe system which is jointed using PVC solvent cement, this significantly reduces installation time when compared to other jointing methods.
Temperature Range: 0 deg C to 60 degC
Jointing Method: Cold Solvent Cement
Size Range: DN15 - DN400mm | 
|
POLYPROPYLENE Piping Systems
Polypropylene has excellent resistance to attack by most organic & inorganic chemicals and is most suited to applications in the Pharmaceutical, Electronics and Chemical industries. Polypropylene is able to operate over a wide temperature range which makes it ideal for the conveyance of highly corrosive media at elevated temperatures.
Polypropylene is assembled using heat fusion, in sizes up to and including 160mm a socket / spigot heat fusion machine is used, sizes above this are joined using butt fusion equipment. Electrofusion couplers are available for jointing pipe and pupped fittings in the range 20mm – 315mm.
Temperature Range: -10 degC to 100 degC
Jointing Method:
- Socket Fusion (Up to 160mm)
- Butt Fusion (160mm - 400mm)
- Electrofusion (Up to 315mmOD)
Size Range (Metric): 160mmOD - 400mmOD | 
|
PVDF Piping Systems
With excellent physical, chemical and thermal properties PVDF pipes, fittings and valves are used in many industries and applications such as Chemical, Petrochemical, Hydrometallurgical, Pharmaceutical, Food, Nuclear, Paper and Pulp and Metal Surface Coatings. PVDF is also used in pipe systems for the manufacture of Microchip and Integrated Circuits, particularly for handling Ultra Pure De-ionised water (18M §Ùcm) and chemicals such as acids, chlorofluorinated solvents and hydrogen peroxide. PVDF is also used in the manufacture of Heat Exchangers and may also be used to replace existing Stainless Steel, Hastelloy and Titanium pipe systems. PVDF is jointed using a heat fusion process similar to Polypropylene and cannot be jointed using adhesives or solvents.
Temperature Range: -40 degC to 140 degC
Jointing Method: Socket Fusion
Size Range (Metric): 16mmOD - 110mmOD | 
|
POLYETHYLENE – PE100 Piping Systems
PE100 is a high strength Polyethylene piping system and is used for conveying all types of liquids, slurries and gases. Some of the common applications include, mineral slurry pipelines, sewer rising mains, reuse water, effluent transportation, submarine pipelines, irrigation and mine water supply. Polyethylene is the preferred material for use in trenchless pipelines which are installed by directional drilling, slip lining and pipe bursting methods. PE100 is jointed using a heat fusion method and butt fusion equipment is required, Polyethylene cannot be jointed with adhesives or solvents.
Temperature Range: -20 degC to 70 degC
Jointing Method: Butt Fusion
Size Range (Metric): 160mmOD - 800mmOD | 
|
PVC – UPVC & MPVC
Water and Irrigation Piping Systems
UPVC (un-plasticised polyvinyl chloride) has been used in Australia since the 1960’s in applications such as irrigation, water reuse and the plumbing markets. uPVC is very economical and would be on of the most commonly nominated pipe systems on the market today.
MPVC is a proven development which successfully modifies standard uPVC pipe formulations and production parameters to safely allow the reduction of the factor of safety traditionally built in to the design parameter for pipes made from PVC material resulting in significant benefits to both producer and consumer alike. Typical applications include major potable water supply and reticulation, process pipelines, effluent disposal irrigation and turf watering systems.
Temperature Range: 0 degC to 60 degC
Jointing Method: Solvent Cement & Rubber Ring
Size Range:
- Series 1 - UPVC: DN40 - DN575mm
- Series 2 - MPVC: DN100 - DN225mm
PLASPIPE PVC PRESSURE PIPE SYSTEMS BROCHURE
PLASPIPE PVC PRESSURE PIPE SYSTEMS WALL CHART |
|
|
