 |
| Pipeline Components - Clamps (Repair and Offtake) |
Tyco Water manufacture and distribute a variety of styles of 316 Stainless Steel clamps, further to these clamps, is the Socket Joint Leak Clamp, though sometimes referred to as a coupling by users. See below for the range of these products
For further information, please contact your nearest Tyco Water Customer Centre.
To view the various documents, you require Adobe Acrobat Reader installed.
Please download the latest reader via the link provided.
|
 | Kwik Repair Clamps
A quick repair for damaged galvanised steel or copper with pinholes, punctures or splits.
Material: 316 stainless steel skin, Nitrile rubber gasket cartridge, galvanised steel fasteners (316 SS optional), ductile iron lugs with epoxy enamel paint
Size Range: DN12 - DN50 (full circle)
Technical Sheet Kwik Clamp 864 KB
Kwik Clamp - Installation Instructions
|  | Stainless Steel Repair Clamp
A fast, permanent and economical repair to most damaged pipes, with pinholes, cracks and full circumferential damage. Clamp OD range means that clamp has multi-pipe repair capabilities.
Material : 316 Stainless Steel Skin, Nitrile Rubber Gasket, 316 Stainless Steel Fasteners
Standard Sizes : DN50 - DN600
Standards : AS 4181
Certification : StandardsMark Lic No. QAS1785
Technical Sheet - 316 Stainless Steel Repair Clamp
Technical Sheet - 316 Stainless Steel Double Part Repair Clamp
Technical Sheet - 316 Stainless Steel Multi Part Repair Clamp
Repair Clamp - Installation Instructions
|  | Stainless Steel Tapped Off-Take Repair Clamp
A fast and economical way to repair pipes with pulled services, or for tapping on unstable or damaged pipe.
Material : 316 Stainless Steel Skin, Nitrile Rubber Gasket, 316 Stainless Steel Fasteners
Standard Sizes : DN50 - DN600
Standards : AS 4181
Certification : StandardsMark Lic No. QAS1785
Technical Sheet - Tapped Off-take Repair Clamp |  | Flanged Off-Take Clamp
A flanged offtake clamp is designed to provide a flange connection off a new or existing pipeline. This clamp is ideal for tapping pipelines under pressure, or for hydrant and air valve installations on existing pipes.
Material : 316 Stainless Steel Skin, Nitrrile Rubber Gasket, 316 Stainless Steel Fasteners
Standard Sizes : DN100 - DN600 (clamp), DN80 - DN300 (offtake)
Standards : AS 4181
Certification : StandardsMark Lic No. QAS1785
Flanged Off-take Clamp - Installation Instructions
|  | Sewer OB Junction Clamp
A simple and permanent way of installing a new sewer service on an existing sewer main or to repair and reconnect a damaged sewer branch
Material : 316 Stainless Steel Skin, Nitrile Rubber Gasket, 316 Stainless Steel Fasteners
Size Range : DN100 - DN450 (main), DN100 - DN225 (offtake)
Technical Sheet - Sewer OB Clamp
Sewer OB Clamp - Intsallation Instructions
|  | Socket Leak Clamp
The Socket Leak Clamp is designed to provide a fast and economical seal over a leaking socket-spigot joint or collar on asbestos cement, ductile iron or cast iron pipe. The fitting is easy to install and may replace the need for cutting out the effected joint.
Material:
Grey oxide coated ductile iron
Nitrile rubber Interlock gasket (shown across)
Galvanised steel fasteners (316 stainless steel optional)
Size Range : DN80 - DN1200
Note: Socket Leak Clamps are not suitable for ductile iron pipes manufactured from 2003
Technical Sheet - Socket Leak Clamp
Socket Leak Clamp - Installation Instructions
|
|
|
