 |
Resilient Seated Gate Valve Figure 500
Figure 500 resilient seated gate valves are designed and manufactured to AS 2638-2. Suitable for use with drinking water and waste water, in below ground applications. Used for the isolation of sections and branches in pipelines.
Size Range: DN80 - DN600
Allowable Operating Pressure: 1600kPa
End Configurations : Flange, Socket or Spigot
Maximum Temperature: 40 deg C
Standards: AS2638.2 - Gate Valves for Waterworks Purposes
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - Figure 500 Resilient Seated Gate Valve |
 |
Metal Seated Gate Valve - Figure 400
Figure 400 metal seated gate valves are designed and manufactured to AS 2638.1. Suitable for use with drinking water and waste water in below ground applications. Used for the isolation of sections and branches in pipelines.
Size Range: DN80 - DN900
Allowable Operating Pressure: 1600 kPa or 3500 kPa
End Configurations : Flange, Socket or Spigot
Maximum Temperature: 40 deg C
Standards: AS2638.1 - Gate Valves for Waterworks Purposes
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - Figure 400 Metal Seated Gate Valve |
 |
Resilient Seated Gate Valve Figure 500H & 500R
Figure 500H and 500R Resilient Seated Gate Valves are designed and manufactured to AS 2638.2 for above ground use or installed in valve pits. Suitable for use with water or waste water, in above ground applications. Rising spindle gate valves are commonly used in fire service applications where a positive indication of open or closed position is necessary.
- Figure 500H non rising spindle
- Figure 500R rising spindle (OS&Y).
Size Range: DN80 - DN300
Allowable Operating Pressure: 1600 kPa
End Configurations : Flange
Maximum Temperature: 40 deg C
Standards: AS2638.2 - Gate Valves for Waterworks Purposes
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - Figure 500H & 500R Resilient Seated Gate Valve |
 |
Metal Seated Gate Valve Figure 600 & 601
Figure 600 and 601 Metal Seated Gate Valves are designed and manufactured to AS 2638.1 for above ground use or installed in valve pits. Suitable for use with water or waste water in above ground applications. Rising spindle gate valves are commonly used in fire service applications where a positive indication of open or closed position is necessary.
- Figure 600 non-rising spindle
- Figure 601 rising spindle (OS&Y)
Size Range: DN80 - DN300
Allowable Operating Pressure: 1600 kPa or 3500 kPa
End Configurations : Flange
Maximum Temperature: 40 deg C
Standards: AS2638.1 - Gate Valves for Waterworks Purposes
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - Figure 600 & 601 Metal Seated Gate Valve |
 |
Resilient Seated Gate Valve Figure 500 with Bypass
Figure 500 Resilient Seated Gate Valves are designed and manufactured to AS 2638.2. Suitable for use with water or waste water, in above ground applications. Bypass Valves have integral offtakes and additional valve incorporated into the design
Size Range: DN600/DN150 bypass - DN450/DN100 bypass
Allowable Operating Pressure: 1600 kPa
End Configurations : Flange
Maximum Temperature: 40 deg C
Standards: AS2638.2 - Gate Valves for Waterworks Purposes
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - Figure 500 Resilient Seated Gate Valve with Bypass
|
 |
AUSLITE Resilient Seated Gate Valve
AUSLITE Resilient Seated Gate Valves are designed and manufactured to AS 2638.2. Suitable for use with water or waste water, in above or below ground applications.
Size Range: DN100 & DN150
Allowable Operating Pressure: 1600 kPa
End Configurations : Flange
Maximum Temperature: 40 deg C
Standards: AS2638.2 - Gate Valves for Waterworks Purposes
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - AUSLITE Resilient Seated Gate Valve
|
|
Metal Seated Gate Valve - Shouldered End
Figure 600, Shouldered End Metal Seated Gate Valves are designed and manufactured to AS 2638.1. Suitable for use with water or waste water.
- Figure 600 non-rising spindle
Size Range: DN100 - DN150
Allowable Operating Pressure: 3500 kPa
End Configurations : Shouldered End
Maximum Temperature: 40 deg C
Standards: AS2638.1 - Gate Valves for Waterworks Purposes
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - Shouldered End Gate Valves
|
 | Resilient Seated Gate Valve - Shouldered End
Auslite Resilient Seated Gate Valves are designed and manufactured to AS 2638.2. Suitable for use with water or waste water.
Size Range: DN100 - DN150
Allowable Operating Pressure: 2500 kPa
End Configurations : Shouldered End
Maximum Temperature: 40 deg C
Standards: AS2638.2 - Gate Valves for Waterworks Purposes
AS4020 - Suitable for Contact with Drinking Water
Certification: ProductMark Registration No. PRD/R61/0412/2
Technical Sheet - Shouldered End Gate Valves
|
 |
Valve Spindle Extension
Valve spindle extensions facilitate the opening and closing of gate valves where the valves are located below ground or in pits at an entended distance from the opening level.
Compatible Valve Size Range: DN80 - DN600
Available Lengths: Cast Ductile Iron - 150mm - 300mm - 375mm
Fabricated - From 32x32mm square section Grade 1045 Carbon Steel maximum one piece length 3500mm.
Extension spindle support brackets should be installed every two meters.
Standards: AS2638 - Gate Valves for Waterworks Purposes
Technical Sheet - Valve Spindle Extension |
 |
Resilient Seat Swing Check Valve
Swing Check valves are designed and manufactured to AS 4794. They are suitable for water and wastewater applications. Used to prevent backflow within a pipeline. The counterweight version features a unique dual hinge arrangement for faster closing, less water hammer.
Size Range: DN 100 - DN 150
Allowable Operating Pressure: 1600 kPa
Maximum Temperature: 40 deg C
Standards: AS4020 - Suitable for contact with drinking water
Technical Sheet - Swing Check Valves |
 |
Sureflow Spring Hydrant
DN80 - DN100 SUREFLOW spring hydrant valves are designed and manufactured to AS 3952.
Spring Hydrant valves provide direct access to water pipelines for fire fighting purposes. Accesss is gained by the attachment of a standpipe to the hydrant lugs. The hydrant can also be used as a scouring or flushing point.
Allowable Operating Pressure: 1600 kPa
Seal Infiltration Resistance : 55 kPa(vacuum)
Maximum Temperature: 40 deg C
Standards: AS3952 - Spring Hydrant Valve for General Purpose
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/3
Technical Sheet - Sureflow Spring Hydrant |
 |
Swash Spring Hydrant
DN80 - DN100 SWASH Spring Hydrant Valves are designed to allow for direct full bore access to the pipeline for insertion and removal of swabs. SWASH hydrant valves perform as normal hydrants. When the yoke is disconnected, the internal components may be removed to provide an entry and exit point for scouring swabs.
Allowable Operating Pressure: 1600 kPa
Seal Infiltration Resistance: 55 kPa (vacuum)
Maximum Temperature: 40 deg C
Standards: AS3952 - Spring Hydrant Valve for General Purpose
AS4020 - Suitable for contact with drinking water
Certification: ProductMark Registration No. PRD/R61/0412/3
Technical Sheet - Swash Spring Hydrant |
 |
South Australian Fireplug
DN80 fireplugs are manufactured to conform to SA Water specification SAW 2001.
Allowable Operating Pressure: 1600 kPa or 3500 kPa
Maximum Temperature: 40 deg C
Specification : SAW 2001.
Certification : AS 4020 - Suitable for contact with drinking water
Technical Sheet - South Australian Fireplug
|
 |
West Australian Hydrant Isolator
DN100 West Australian hydrant isloators are manufactured to conform to Water Corporation specification SPS 292.
Allowable Operating Pressure: 1600 kPa
Maximum Temperature: 40 deg C
Specification: WAWC No. SPS 292
Certification: AS 4020 - Suitable for contact with drinking water
Technical Sheet - West Australian Hydrant Isolator
|
 |
Hydrant & Air Valve Isolator
Hydrant & Air Valve Isloators can be used in conjunction with spring hydrants, air valves or screwed outlets to provide isolation for maintenance purposes.
Size Range: DN80-DN100
Allowable Operating Pressure: 1600 kPa or 3500kPa
Maximum Temperature: 40 deg C
Certification: AS 4020 - Suitable for contact with drinking water
Technical Sheet - Hydrant & Air Valve Isolator |
